Cozzia 16027 Manuel d'utilisateur télécharger pdf

Luxury Features

Table of Contents

Thank you for purchasing the EC-380 Massage Chair.

Before using your massage chair, please read the contents of this instruction

manual and refer to it when needed.

Luxury Features ................................................... 2

Safety Precautions .............................................. 3-4

Chair Components .............................................. 5-6

Chair Installation & Moving .................................. 7-11

Grounding Instructions ........................................ 12

Chair Specifications ............................................. 13

Operation Guide ................................................... 14-20

Troubleshooting ................................................... 21

Warnings .............................................................. 22

Consumer warranty .............................................. 23-25

Warranty Card (Attachment)

Chair components

Instruction Manual EC-380

When using the massage chair, basic precautions should always be followed to

reduce the risk of electric shock, burns, fire or injury to persons. Please read the

following precautions before using the massage chair.

Make sure the power plug is securely inserted into a proper electrical outlet to

reduce the risk of short-circuit and fire.

Always unplug the massage chair from the electrical outlet immediately after

using and before cleaning.

DO NOT use the massage chair in areas where the humidity is high such as a

sauna or steam room.

DO NOT use the massage chair outdoors and avoid areas with direct sunlight.

If the electricity is off, turn the power switch to the OFF position and unplug the

massage chair from the electrical outlet to prevent any damages to the chair

when the electricity comes back on.

Never plug/unplug the power cord plug socket with wet hands.

Close and continuous supervision is necessary when the massage chair is used

by, on or near children or disabled persons.

No more than one person should use the massage chair at a time.

The massage chair is intended for use as described in the Instruction Manual.

Do not use any attachments other than those recommended by Berkline.

DO NOT attempt to stand or sit on the backrest, armrest or footrest in order to

prevent accident, injury or damage to the chair.

Avoid falling asleep while using the massage chair.

Always keep the massage chair clean, and never insert any objects into or

around the gaps of the massage chair.

DO NOT move the massage chair by pulling on the power supply cord.

Make sure there are no children, pets or other obstacles behind or underneath

the massage chair.

If you find any rips or tears in the fabric of the massage chair contact the Berkline

service department and stop using the chair immediately.

This massage chair is designed for household use and should not be used in

non-residential settings.

Please consult your doctor if you are in doubt as to whether or not you should

use this massage chair.

Please consult a doctor before using the massage chair if you are pregnant,

undergoing any medical treatment, using a medical electronic device such as a

pacemaker, or are experiencing any of the following: Malignant tumor, heart

disease, back pain, abnormal or curved back bone, osteoporosis or acute illness.

If you experience pain while using the massage chair, stop using the chair

immediately and consult your doctor.

Never use a massage function on swollen or inflamed parts of the body.

DO NOT use the massage chair for more than 30 minutes at a time.

DO NOT use the massage chair where aerosol (spray) products are being used

or where oxygen is being administered.

This massage chair is a non-professional product designed to provide a comfortable

massage and should not be substituted for appropriate medical treatment.

If the supply cord is damaged, it must be replaced by a special cord or assembly

available from the manufacturer or its service agent.

Safety Precautions

Chair Specifications

Grounding Instructions

Model No.

Rated Voltage

Rated Frequency

Rated Power Consumption

Timer

Max Time Rate

Length of Wire

Usage Condition

Storage Condition

Safety feature

Using benefits

Description

Specifications

EC-380

120V ~

60Hz

220W

5/10/15/25/30 minutes

30 minutes

Product carton: 52" x 30.3" x 32.3"

Side panel carton: 37.8" x 24.4" x 14.6"

Product gross weight: 253.3 lbs

Product net weight: 213.6lbs

Controller wire: 1.3m

Power supply wire: 2.2m

Environment temperature: 10°-40°

Contrasting humidity level: 30-85RH

Storage temperature: 20°-60°

Storage humidity level: 30-85RH

Equipped with overheated and power surge

safety protection

Increasing blood circulation

Relieving muscular fatigue

Dimensions(LxWxH)

Weight

Troubleshooting & Product Maintenance

Chair Installations

This massage chair is controlled by a microcomputer and is susceptible to power

surges of +10 to –15%.

The following situations may display in the event of a power surge:

1. Make sure the chair is plugged

into a working outlet.

2. Turn the power OFF and then ON

again.

1. Check to see that the plug is well

connected and working.

2. Make sure that the massage chair

switch is turned to the “I” position.

The massage chair is connected

to the power supply but is not

functioning.

The remote control works, but the

massage chair is not functioning.

The massage chair may have

overheated due to prolonged use.

Turn off the power and allow the chair

to cool for 30-50 minutes.

Both the remote control and the

massage chair are not functioning.

Situation Solution

Warnings

* Do not use water and other cleaning detergents on the massage chair.

* Do not stack, stab, slit or harshly pull on the surface of the massage chair.

* Gently press the buttons during operation and avoid hitting the buttons with hard

objects.

* Pull out the power supply plug after each use.

* Do not use the massage chair for more than 30 minutes at a time.

* DO NOT position any body part in between the gaps of the leg rest when the

automatic leg extension feature is in operation as demonstrated PIC 1, in order to

prevent pinch to you. If you are remiss to position any body part in between the

gaps of leg rest, please press PAUSE button to stop and then get your body part

out rapidly as demonstrated PIC 2.

* If you have to rise from the chair to stop accident, injury or damage to others by

you or you want to get your feet and calves out when the automatic leg extension

feature is in operation, please press PAUSE button to stop as demonstrated PIC

2, the footrest will gradually deflate in some seconds and then quickly get your foot

and calves out and rise.

Note: This way as above mentioned just using in emergencies. Please bear in

mind that always return the footrest to its original length and restore it to its original

position, then rise from the chair in order to prevent accident, injury or damage to

yourself and chair.

PIC 1 PIC 2

The operation of massage chair is controlled by a microcomputer that performs

various intelligent massage methods and combinations, like Kneading, Tapping,

Clapping, Shiatsu, Rolling, Vibration and Air Massage. All these methods massage

acupressure points accurately to effectively alleviate fatigue, promote metabolism

and improve blood circulation.

The chair is equipped with five sets of full body automatic programs and three sets

of localized automatic programs to thoroughly fulfill your various needs.

Various types of massage functions can be combined for customized massaging

programs, in addition to the precise point massage.

The combination of air pressure for the seat pad and leg as well as the calf and

vibration functions can be set automatically for more effective massage.

● Spring-styled massage that is specially structured for the back is designed

according to curve of the human body to provide a more effective massage.

● The massage rollers use an interlocking gear to provide in-depth massage to the

acupressure points on the back.

● Designed with double automatic adjustment, the chair’s backrest can be adjusted

from 115 to 160, while the footrest, from 0 to 90 to suit you.

● The timer function can be adjusted according to your desired duration of the

massage program.

● Liquid crystal display and glow-in-the-dark display for a user friendly operation

even in the dark.

●

Designed with power surge and pressure detector as well as automatic

temperature sensor and auto shutdown mechanism for safety.

●

The operation is controlled by intelligent microprocessor for excellent

performance and consistent quality.

Step 1: Install one side panel, tighten it with two socket head screws

Step 2: Insert and connect the backrest to the bottom seat, and fasten the backrest

into the allocated slot.

Step 3: Connect and lock backrest to bottom seat then secure position.

Step 4: Connect the plugs to the corresponding place in the seat according to the

marks given.

Step 5: Unfold the backrest until you hear it click into place.

Step 6: Tighten the remote control holder with four screws. Tighten the placer of

remote control holder in the top of supporter with screws.

Step 7: Connect the cover to the backrest with the zipper.

zipper

Step 8: Clip joint the pillow to the backrest cover.

Wheel

Pillow Pad

Backrest

Backrest Pad

Armrest

Controller

Seat Pad

Calvesrest

Legrest

Footrest

Massaging Position

Moving the Chair

1. Lift up the Calves Rest.

2. Then recline the chair to approximately to 45 degrees, so that you can easily move

the chair around the house with a slight pull push.

Caution:

1) Before you move the chair, please put the footrest back into the original position first.

Otherwise, injuries might occur in the process of moving.

2) Avoid moving the massage chair when there is someone seated on it.

3) Placing a mat underneath the massage chair is advisable, as the moving process

might leave scratches on the floor surface.

Fully insert the plug into an appropriate outlet.

An improper equipment-grounding conductor may result in electric shock. Contact a

qualified electrician if you are not sure that the product is properly grounded. Do not

modify the plug that is included with the massage chair. If the plug does not fit the

outlet, contact a qualified electrician to install an outlet to fit the massage chair plug.

The back massage strength-control pad has been inserted

into the backseat cover.

If strong massage is desired, remove the back massage

strength-control pad from the cover; this strengthens the

massage. If mildermassage are desired, insert the back

massage strength-control pad into the cover; this lessens

the strength of the massage.

Controller Diagram

Full Body Auto

Programme

Localised Auto

Programme

Operation Guide

Connect to the power supply, and turn the switch to “I” position. The chair is now in idle

mode. During idle mode, there are only seven funtions: ON/OFF, Foot Extend, Pause,

Recline, Sit Up, Lift Leg or Recline Leg that can be operated.

CONTROL BUTTONS FOR THE MASSAGE CHAIR

1. ON/OFF

The Start/Stop Control Button

Press once on this button and the backlight of the Remote Control will start blinking: the

chair is in idle mode. Press any massage function button to begin massage functions on

the chair. This will also start the Timer.

Press this button again to stop all massage functions, the massage rollers will return to

its original position.

2/3. Recline/Sit Up

Angle Adjustment Control Button for Massage Chair

These two control buttons can adjust the Reclining and Sit Up angle respectively.

Press once on the Reclining or Sit Up control button to adjust the Backrest and Footrest

to a comfortable position. Press any of the control button again to adjust for Reclining,

Sit Up, Lift Leg or Recline Leg, to confirm the position.

4/5. Lift Leg/Recline Leg

Angle Adjustment Control Button for Calves

These two control buttons can adjust massage angle on the Legrest.

Press once on the Lift Leg or Recline Leg control button, and the Legrest will adjust itself

to a comfortable position. Press any of the control buttons again for Reclining, Sit Up, Lift

Leg or Recline Leg to confirm the position.

Note: The adjustment angle functions will be activated by sustained pressing of the

button for 2 seconds.

6/7. Length Adjustment Control Button for Legrest

These two control buttons can adjust the length on the legrest.

Press the button once to adjust the legrest to a comfortable length. Press the button

again to confirm the length.

8. Length Auto Adjustment Control Button

It’s equipped with an Auto Function that length of footrest can be adjusted according to

the user’s leg length for a more effective massage. Every time the button is pressed, the

auto function will detect the best massage length.

9. Timer

The Timer’s Time Interval

After the masage process is activated, the chair will be automatically set on a 15-minute

Timer. Subsequently, every time the “TIMER” button is pressed, the Timer’s interval will

be changed in the sequence of “20>25>30>5>10>15” minutes.

When there is only 1 minute remaining in the set time, the Backlight of the Remote

Control will light up automatically, followed by 5 beeps to alert the user.

10. The Pause Button

When the chair is in massage mode and the user wants to temporarily pause it, press

the Pause button and all massage functions will stop. The “Pause” icon will be blinking

on the Liquid Crystal Display and the set time countdown will be paused as well. The

chair is now in idle mode. Only the “Pause, Sit Up, Lift Leg, Recline Leg” can be used.

Press the Pause button again to immediately cease the “Pause” function and resume the

original massage function. The countdown continues.

11. Zero-G

Press this button to active the Zero-G function. Press the button again to stop the Zero-G

massage function.

A. Full Body Auto Programme

If one of the five Auto Programmes is activated before the Auto Scan of the entire body,

the machine will automatically do a height scan for the back. At the same time the user

can manually adjust the massage height to the prefered level.

The following are the Auto Programmes available:

12. Healthcare

13. Relax

14. Therapy

15. Smart

16. Circulation

The Backrest and Footrest will resume original position when this Auto Programme is

about to end.

B. Localised Auto Programme

This programme gives precise massage at the exact part of the body for better

localized-massage effect.

17. Neck/Shoulder

Neck/Shoulder Auto Programme Start/Stop Control Button.

18. Back/Lumbar

Back/Lumbar Auto Programme Start/Stop Control Button.

19. Lower Body

Lower Body Start/Stop Control Button.

20. Demo

Press this button for a brief demonstration of the features of the massage chair.

21. Tapping

Tapping funtion Start/Stop Control Button- 3 sizes of width, 5 levels of speed to be

adjusted.

Press this button once to active the tapping function for a full back massage at medium

speed. Press the button again to stop the tapping massage function.

22. Clapping

Clapping function Start/Stop Control Button- 3 sizes of width, 5 levels of speed to be

adjusted.

Press this button once to active the clapping function for a full back massage at medium

speed. Press the button again to stop the clapping massage function.

23. Shiatsu

Shiatsu function Start/Stop Control Button- 3 sizes of width, 5 levels of speed to be

adjusted.

Press this button once to active the shiatse function for a full back massage at medium

intensity. Press the button again, to stop the shiatsu massage function.

24. Rolling

Rolling function Start/Stop Control Button- 3 sizes of width.

Press this button once and it will activate the Rolling function for full back massage.

Press again to stop the function.

This function cannot be used to perform “Spot” massage.

25. Swedish

Swedish function Start/Stop Control Button- 5 levels of speed to be adjusted.

Press this button once and it will activate the Swedish function for full back massage.

Press again to stop the function.

26. Speed

The Speed Adjustment button for Tapping, Clapping, Swedish and Shiatsu mode.

After activating the Tapping, Clapping, Swedish or Shiatsu function, every time the

button is pressed, the strength can be adjusted in the cycle.

27. Width

The Width Adjustment button for Tapping, Clapping, Shiatsu, Rolling mode.

After activating the Tapping, Clapping, Shiatsu or Rolling function, every time the button

is pressed, the width can be adjusted in the cycle.

28. Kneading

Kneading function Start/Stop Control Button- 5 strength levels to be adjusted

Press once on “Kneading” to activate full back-massage of Kneading mode, press again

to stop the Kneading function.

This function can be combined with Tapping/Clapping/Shiatsu to enjoy Kneading +

Tapping, Kneading + Clapping, Kneading + Shiatsu multi massage functions.

29. Strength

The Adjustment Button for Kneading Speed

After activating the Kneading function, every time the button is pressed, the speed can

be adjusted in the cycle.

Setting Spot or Localised Back Massage

30. Spot

The Spot or Localised Back massage

This button allows user to select Spot massage for any part on the back. Press this button

once to activate spot massage while the original massage mode continues to run at the

original position. Press again to cease Spot massage function and resume full back

massage function.

31. Partial

The Partial Back Massage

This button allows user to select Partial Massage for any part of the back. The position for

Partial Massage can be adjusted for a user friendly method of Localised Massage.

Press this button once to continue the original massage mode, while activating Partial

Massage, which takes the original position as the centre to perform Partial Massage with

the width of approx. 8cm. Press again to stop Partial Massage function and resume full

back massage function.

Setting Seat/Leg Vibration

32. Seat V

Seat Vibration function Start/Stop Control Button

Press the Vibration button once to activate the Vibration. Press this button again and it will

stop the Vibration function.

33. Back & Seat

Back and Seat Air-pressure Start/Stop Control Button- 5 levels of intensity to be adjusted.

Press once to activate Seat Air-pressure massage mode. Press again to stop the

function.

34. Calves

Calves Air-pressure Control Button- 5 levels of intensity to be adjusted

Press once to activate Calves Air-pressure Massage Mode to enjoy rhythmic air-pressure

massage at the calves. Press again to stop the function.

35. Auto

Auto Air Squeeze function Start/Stop Button- 5 levels of intensity to be adjusted

Press once to activate pre-programmed Air-pressure Massage Mode to enjoy rhythmic

air-pressure massage. Press again to stop the function.

36. Intensity

The Intensity Adjustment Button for Air-pressure, Auto or Manual- 5 levels of intensity to

be chosen.

After activating the Air-pressure function, press this button to adjust the intensigy in the

cycle.

37/38. Upward & Downward

Position Adjustment Button for Spot or Partial Massage

These keys are used for adjusting backrest massage position to achieve spot massage.

Press Upward & Downward key continuously until the massage wheel rolls to ideal

position and then undo the key to get the spot massage function.

Press Rolling key to eliminate spot function.

Finish Operating

Please press the “ON/OFF” button after use, the chair will stop operation. Massage

Rollers will resume to its original position; then switch the power supply button under the

chair to “O” and unplug the machine from the socket.

1. When positioning the chair, please leave 80cm of space

behind the backrest to allow free reclining of the backrest.

2. Unplug from outlet when installing the Chair parts.

COZZIA Consumer Warranty

COZZIA products have the following warranty:

COZZIA’s massage chairs,

motion upholstery and home theater massage seating provide a one year in-home

service warranty and a two-year parts warranty. COZZIA customer service will not

issue Return Material Authorizations (RMAs) for products. COZZIA products will be

either repaired by the consumer or by an in-home technician. COZZIA will not issue

Return Material Authorizations (RMAs) for buyer’s remorse.

SERVICE AND TECHNICAL SUPPORT

Consumers may contact COZZIA’s customer service department at 1-877-977-0656

between 9:00 am and 5:00 pm PST, Monday through Friday or email us at

[email protected] or visit our web at www.cozzia-usa.com for warranty or

service issues.

Consumers are required to provide the unit serial number and dated proof of

purchase (sales receipt) when they contact the COZZIA service department

regarding a repair.

A COZZIA customer service representative will attend to most consumer inquiries,

but in some cases a technical service specialist will provide advanced support.

Non-warranty repair is provided on a "per incident" basis. COZZIA customer service

will verify that the unit has failed and provide instructions for repairing a unit. All

applicable repairs, parts, shipping, handling, local tax and a "per incident" fee will be

charged for non-warranty repairs and support calls.

Proof of purchase (original receipt) is required for all warranty repairs or service.

EXTENDED WARRANTIES:

Cozzia offers extended warranty programs to enhance ownership of Cozzia

product. Extended warranty provides: 3-year limited repair or replacement massage

chair warranty with on-site service.

Please visit www.cozzia-usa.com for the latest terms and pricing for extended

warranties.

●

Floor Models and Demonstration Units

have a prorated warranty period

that begins the day the model is placed on the floor and connected to an

electrical outlet by the retail partner. Proof of purchase is required in order

to obtain warranty service and parts. Non-warranty parts and service are

available at a “per incident” charge.

●

Warranty Coverage Period

- Warranty coverage starts at the time that the

consumer PURCHASES their chair. Proof of purchase is required for all

warranty repairs. The warranty time period is measured by continuous

calendar days based on a seven-day week.

●

Field Service

– COZZIA customer service department will diagnose and

schedule an authorized service provider to repair the chair in the

consumer's residence.

●

Parts

- All parts deemed necessary for repairs will be shipped to the

consumer at no charge by the COZZIA service department.

PRODUCT REPAIRS

Many COZZIA product repairs may be performed by the consumer in their own home

with parts and instructions supplied by COZZIA such as remote controller

replacements that don’t require a technician.

Canadian consumers may contact COZZIA's customer service department at

1-877-977-0656

between 9:00 am and 5:00 pm PST, Monday through Friday for

warranty or service issues.

CONSUMER WARRANTY LIMITATIONS AND EXCLUSIONS

● Warranties are only valid in the 48 contiguous United States and Canada

and are contingent upon the consumer operating the chair according to the

corresponding instruction manual.

● The warranty only applies to COZZIA products and does not include any

accessories or enhancements.

● Field service requires pre-approval and must be performed by COZZIA’s

authorized field service personnel. Field service is only available in the

United States and in major metropolitan areas in Canada.

● Softening of foams and filling composites in pillows, pads, and memory

foam occurs naturally and does not constitute a defect under this warranty.

● Fading, wear and piling of fabrics occurs naturally and does not constitute

a defect under this warranty.

● Natural markings, grain and dye variations in leather do not constitute a

defect under this warranty.

● Warranties do not cover any loss or damage resulting from improper

installation, unauthorized repairs or modifications, improper use of

electrical/power supply, loss of power, dropped product, a malfunction or

damage of an operating part from failure to provide manufacturer's

recommended maintenance, transportation damage, theft, abuse, misuse,

neglect, vandalism or environmental conditions (fire, floods, rust, corrosion,

sand, dirt, windstorm, hail, earthquake or exposure to weather conditions),

loss of use during the period the product is at a repair facility, or otherwise

awaiting parts or repair.

● Damage due to shipping and handling does not constitute a defect under

this warranty.

● Under no circumstance shall COZZIA or its representatives be liable for

indirect, consequential, or incidental damages (including damages for lost

profits, business interruption, bodily injury, medical and the like), even if

any party has been advised of the possibility of such damages.

● Warranties are non-transferable and shall be in lieu of any other warranty,

express or implied, including but not limited to any implied warranty or

merchantability or fitness for particular use.

● COZZIA’s sole liability and the purchaser's exclusive remedy shall be for

the repair, or at COZZIA’s option, for the replacement of the defective part.

Not withstanding the above, if replacements parts for defective materials

are not available, COZZIA reserves the right to make substitutions in lieu

of repair or replacement.

● All warranties begin on the DATE OF PURCHASE; no allowance or

extension is offered for delivery and/or installation.

●

Warranties do not apply to rental, business, commercial, institutional or

other non-residential users.

Product Serial No. (located on product):

Purchase Price: Model No:

Date Purchased:

First Name: Last Name:

Address:

City: State: Zip:

Phone:

Email:

Please mail to:

Cozzia USA LLC

14251 E Don Julian Rd

City Of Industry CA 91710

Tel: 1-877-977-0656

Fax: 1-800-521-4712

WARRANTY REGISTRATION FORM

Warranty Card

Instruction Manual EC-380 1

Résumé du contenu

Page 1 - Instruction Manual EC-380

234Luxury Features01021Table of ContentsThank you for purchasing the EC-380 Massage Chair.Before using your massage chair, please read the contents of

Commentaires sur ces manuels

Pas de commentaire

Cozzia 16027 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Meubles Cozzia 16027. Cozzia 16027 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Meubles Cozzia 16027